public class SCD extends AbstractSegment
Represents an HL7 SCD message segment (Anti-Microbial Cycle Data). This segment has the following fields:
log
Constructor and Description |
---|
SCD(Group parent,
ModelClassFactory factory)
Creates a new SCD segment
|
Modifier and Type | Method and Description |
---|---|
protected Type |
createNewTypeWithoutReflection(int field) |
CNE |
getAbortCycle()
Returns
SCD-19: "Abort Cycle" - creates it if necessary
|
CNE |
getAlarm()
Returns
SCD-20: "Alarm" - creates it if necessary
|
XCN |
getAttendingDoctor()
Returns
SCD-34: "Attending Doctor" - creates it if necessary
|
CQ |
getConditionTime()
Returns
SCD-6: "Condition Time" - creates it if necessary
|
CQ |
getControlTemperature()
Returns
SCD-14: "Control Temperature" - creates it if necessary
|
TM |
getCycleCompleteTime()
Returns
SCD-16: "Cycle Complete Time" - creates it if necessary
|
NM |
getCycleCount()
Returns
SCD-2: "Cycle Count" - creates it if necessary
|
DTM |
getCycleStartDateTime()
Returns
SCD-11: "Cycle Start Date/Time" - creates it if necessary
|
TM |
getCycleStartTime()
Returns
SCD-1: "Cycle Start Time" - creates it if necessary
|
CWE |
getCycleType()
Returns
SCD-28: "Cycle Type" - creates it if necessary
|
CWE |
getDeviceStatus()
Returns
SCD-10: "Device Status" - creates it if necessary
|
SN |
getDilutionFactor()
Returns
SCD-35: "Dilution Factor" - creates it if necessary
|
CNE |
getDoorOpen()
Returns
SCD-26: "Door Open" - creates it if necessary
|
CQ |
getDryTime()
Returns
SCD-12: "Dry Time" - creates it if necessary
|
CQ |
getExhaustTime()
Returns
SCD-8: "Exhaust Time" - creates it if necessary
|
CQ |
getFillTime()
Returns
SCD-36: "Fill Time" - creates it if necessary
|
CQ |
getInjectionRate()
Returns
SCD-31: "Injection Rate" - creates it if necessary
|
CQ |
getInletTemperature()
Returns
SCD-37: "Inlet Temperature" - creates it if necessary
|
CQ |
getLeakRate()
Returns
SCD-13: "Leak Rate" - creates it if necessary
|
NM |
getLoadNumber()
Returns
SCD-5: "Load Number" - creates it if necessary
|
CNE |
getLongInChargePhase()
Returns
SCD-21: "Long in Charge Phase" - creates it if necessary
|
CNE |
getLongInExhaustPhase()
Returns
SCD-22: "Long in Exhaust Phase" - creates it if necessary
|
CNE |
getLongInFastExhaustPhase()
Returns
SCD-23: "Long in Fast Exhaust Phase" - creates it if necessary
|
XCN |
getOperatorUnload()
Returns
SCD-25: "Operator - Unload" - creates it if necessary
|
CQ |
getOverTemperature()
Returns
SCD-18: "Over Temperature" - creates it if necessary
|
CX[] |
getPatientIdentifierList()
Returns all repetitions of Patient Identifier List (SCD-33).
|
CX |
getPatientIdentifierList(int rep)
Returns a specific repetition of
SCD-33: "Patient Identifier List" - creates it if necessary
|
int |
getPatientIdentifierListReps()
Returns a count of the current number of repetitions of Patient Identifier List (SCD-33).
|
CNE |
getProcedureCode()
Returns
SCD-32: "Procedure Code" - creates it if necessary
|
CNE |
getReadingFailure()
Returns
SCD-27: "Reading Failure" - creates it if necessary
|
CNE |
getReset()
Returns
SCD-24: "Reset" - creates it if necessary
|
TM |
getScd1_CycleStartTime()
Returns
SCD-1: "Cycle Start Time" - creates it if necessary
|
CWE |
getScd10_DeviceStatus()
Returns
SCD-10: "Device Status" - creates it if necessary
|
DTM |
getScd11_CycleStartDateTime()
Returns
SCD-11: "Cycle Start Date/Time" - creates it if necessary
|
CQ |
getScd12_DryTime()
Returns
SCD-12: "Dry Time" - creates it if necessary
|
CQ |
getScd13_LeakRate()
Returns
SCD-13: "Leak Rate" - creates it if necessary
|
CQ |
getScd14_ControlTemperature()
Returns
SCD-14: "Control Temperature" - creates it if necessary
|
CQ |
getScd15_SterilizerTemperature()
Returns
SCD-15: "Sterilizer Temperature" - creates it if necessary
|
TM |
getScd16_CycleCompleteTime()
Returns
SCD-16: "Cycle Complete Time" - creates it if necessary
|
CQ |
getScd17_UnderTemperature()
Returns
SCD-17: "Under Temperature" - creates it if necessary
|
CQ |
getScd18_OverTemperature()
Returns
SCD-18: "Over Temperature" - creates it if necessary
|
CNE |
getScd19_AbortCycle()
Returns
SCD-19: "Abort Cycle" - creates it if necessary
|
NM |
getScd2_CycleCount()
Returns
SCD-2: "Cycle Count" - creates it if necessary
|
CNE |
getScd20_Alarm()
Returns
SCD-20: "Alarm" - creates it if necessary
|
CNE |
getScd21_LongInChargePhase()
Returns
SCD-21: "Long in Charge Phase" - creates it if necessary
|
CNE |
getScd22_LongInExhaustPhase()
Returns
SCD-22: "Long in Exhaust Phase" - creates it if necessary
|
CNE |
getScd23_LongInFastExhaustPhase()
Returns
SCD-23: "Long in Fast Exhaust Phase" - creates it if necessary
|
CNE |
getScd24_Reset()
Returns
SCD-24: "Reset" - creates it if necessary
|
XCN |
getScd25_OperatorUnload()
Returns
SCD-25: "Operator - Unload" - creates it if necessary
|
CNE |
getScd26_DoorOpen()
Returns
SCD-26: "Door Open" - creates it if necessary
|
CNE |
getScd27_ReadingFailure()
Returns
SCD-27: "Reading Failure" - creates it if necessary
|
CWE |
getScd28_CycleType()
Returns
SCD-28: "Cycle Type" - creates it if necessary
|
CQ |
getScd29_ThermalRinseTime()
Returns
SCD-29: "Thermal Rinse Time" - creates it if necessary
|
CQ |
getScd3_TempMax()
Returns
SCD-3: "Temp Max" - creates it if necessary
|
CQ |
getScd30_WashTime()
Returns
SCD-30: "Wash Time" - creates it if necessary
|
CQ |
getScd31_InjectionRate()
Returns
SCD-31: "Injection Rate" - creates it if necessary
|
CNE |
getScd32_ProcedureCode()
Returns
SCD-32: "Procedure Code" - creates it if necessary
|
CX[] |
getScd33_PatientIdentifierList()
Returns all repetitions of Patient Identifier List (SCD-33).
|
CX |
getScd33_PatientIdentifierList(int rep)
Returns a specific repetition of
SCD-33: "Patient Identifier List" - creates it if necessary
|
int |
getScd33_PatientIdentifierListReps()
Returns a count of the current number of repetitions of Patient Identifier List (SCD-33).
|
XCN |
getScd34_AttendingDoctor()
Returns
SCD-34: "Attending Doctor" - creates it if necessary
|
SN |
getScd35_DilutionFactor()
Returns
SCD-35: "Dilution Factor" - creates it if necessary
|
CQ |
getScd36_FillTime()
Returns
SCD-36: "Fill Time" - creates it if necessary
|
CQ |
getScd37_InletTemperature()
Returns
SCD-37: "Inlet Temperature" - creates it if necessary
|
CQ |
getScd4_TempMin()
Returns
SCD-4: "Temp Min" - creates it if necessary
|
NM |
getScd5_LoadNumber()
Returns
SCD-5: "Load Number" - creates it if necessary
|
CQ |
getScd6_ConditionTime()
Returns
SCD-6: "Condition Time" - creates it if necessary
|
CQ |
getScd7_SterilizeTime()
Returns
SCD-7: "Sterilize Time" - creates it if necessary
|
CQ |
getScd8_ExhaustTime()
Returns
SCD-8: "Exhaust Time" - creates it if necessary
|
CQ |
getScd9_TotalCycleTime()
Returns
SCD-9: "Total Cycle Time" - creates it if necessary
|
CQ |
getSterilizerTemperature()
Returns
SCD-15: "Sterilizer Temperature" - creates it if necessary
|
CQ |
getSterilizeTime()
Returns
SCD-7: "Sterilize Time" - creates it if necessary
|
CQ |
getTempMax()
Returns
SCD-3: "Temp Max" - creates it if necessary
|
CQ |
getTempMin()
Returns
SCD-4: "Temp Min" - creates it if necessary
|
CQ |
getThermalRinseTime()
Returns
SCD-29: "Thermal Rinse Time" - creates it if necessary
|
CQ |
getTotalCycleTime()
Returns
SCD-9: "Total Cycle Time" - creates it if necessary
|
CQ |
getUnderTemperature()
Returns
SCD-17: "Under Temperature" - creates it if necessary
|
CQ |
getWashTime()
Returns
SCD-30: "Wash Time" - creates it if necessary
|
CX |
insertPatientIdentifierList(int rep)
Inserts a repetition of
SCD-33: "Patient Identifier List" at a specific index
|
CX |
insertScd33_PatientIdentifierList(int rep)
Inserts a repetition of
SCD-33: "Patient Identifier List" at a specific index
|
CX |
removePatientIdentifierList(int rep)
Removes a repetition of
SCD-33: "Patient Identifier List" at a specific index
|
CX |
removeScd33_PatientIdentifierList(int rep)
Removes a repetition of
SCD-33: "Patient Identifier List" at a specific index
|
accept, add, add, clear, encode, getField, getField, getLength, getMaxCardinality, getName, getNames, getReps, getTypedField, getTypedField, insertRepetition, isEmpty, isRequired, main, numFields, parse, provideLocation, removeRepetition
getMessage, getParent
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait
getMessage, getParent
public SCD(Group parent, ModelClassFactory factory)
public TM getCycleStartTime()
public TM getScd1_CycleStartTime()
public NM getCycleCount()
public NM getScd2_CycleCount()
public CQ getTempMax()
public CQ getScd3_TempMax()
public CQ getTempMin()
public CQ getScd4_TempMin()
public NM getLoadNumber()
public NM getScd5_LoadNumber()
public CQ getConditionTime()
public CQ getScd6_ConditionTime()
public CQ getSterilizeTime()
public CQ getScd7_SterilizeTime()
public CQ getExhaustTime()
public CQ getScd8_ExhaustTime()
public CQ getTotalCycleTime()
public CQ getScd9_TotalCycleTime()
public CWE getDeviceStatus()
public CWE getScd10_DeviceStatus()
public DTM getCycleStartDateTime()
public DTM getScd11_CycleStartDateTime()
public CQ getDryTime()
public CQ getScd12_DryTime()
public CQ getLeakRate()
public CQ getScd13_LeakRate()
public CQ getControlTemperature()
public CQ getScd14_ControlTemperature()
public CQ getSterilizerTemperature()
public CQ getScd15_SterilizerTemperature()
public TM getCycleCompleteTime()
public TM getScd16_CycleCompleteTime()
public CQ getUnderTemperature()
public CQ getScd17_UnderTemperature()
public CQ getOverTemperature()
public CQ getScd18_OverTemperature()
public CNE getAbortCycle()
public CNE getScd19_AbortCycle()
public CNE getScd20_Alarm()
public CNE getLongInChargePhase()
public CNE getScd21_LongInChargePhase()
public CNE getLongInExhaustPhase()
public CNE getScd22_LongInExhaustPhase()
public CNE getLongInFastExhaustPhase()
public CNE getScd23_LongInFastExhaustPhase()
public CNE getScd24_Reset()
public XCN getOperatorUnload()
public XCN getScd25_OperatorUnload()
public CNE getDoorOpen()
public CNE getScd26_DoorOpen()
public CNE getReadingFailure()
public CNE getScd27_ReadingFailure()
public CWE getCycleType()
public CWE getScd28_CycleType()
public CQ getThermalRinseTime()
public CQ getScd29_ThermalRinseTime()
public CQ getWashTime()
public CQ getScd30_WashTime()
public CQ getInjectionRate()
public CQ getScd31_InjectionRate()
public CNE getProcedureCode()
public CNE getScd32_ProcedureCode()
public CX[] getPatientIdentifierList()
public CX[] getScd33_PatientIdentifierList()
public int getPatientIdentifierListReps()
public CX getPatientIdentifierList(int rep)
rep
- The repetition index (0-indexed)public CX getScd33_PatientIdentifierList(int rep)
rep
- The repetition index (0-indexed)public int getScd33_PatientIdentifierListReps()
public CX insertPatientIdentifierList(int rep) throws HL7Exception
rep
- The repetition index (0-indexed)HL7Exception
- If the rep is invalid (below 0, or too high for the allowable repetitions)public CX insertScd33_PatientIdentifierList(int rep) throws HL7Exception
rep
- The repetition index (0-indexed)HL7Exception
- If the rep is invalid (below 0, or too high for the allowable repetitions)public CX removePatientIdentifierList(int rep) throws HL7Exception
rep
- The repetition index (0-indexed)HL7Exception
- If the rep is invalid (below 0, or too high for the allowable repetitions)public CX removeScd33_PatientIdentifierList(int rep) throws HL7Exception
rep
- The repetition index (0-indexed)HL7Exception
- If the rep is invalid (below 0, or too high for the allowable repetitions)public XCN getAttendingDoctor()
public XCN getScd34_AttendingDoctor()
public SN getDilutionFactor()
public SN getScd35_DilutionFactor()
public CQ getFillTime()
public CQ getScd36_FillTime()
public CQ getInletTemperature()
public CQ getScd37_InletTemperature()
protected Type createNewTypeWithoutReflection(int field)
createNewTypeWithoutReflection
in class AbstractSegment
Copyright © 2001–2017 University Health Network. All rights reserved.