public class OM2 extends AbstractSegment
Represents an HL7 OM2 message segment (Numeric observation). This segment has the following fields:
log
Constructor and Description |
---|
OM2(Group parent,
ModelClassFactory factory)
Creates a new OM2 segment
|
Modifier and Type | Method and Description |
---|---|
protected Type |
createNewTypeWithoutReflection(int field) |
CM_ABS_RANGE |
getAbsoluteRangeForOrdinalContinuousObs()
Returns
OM2-8: "Absolute Range for Ordinal & Continuous Obs" - creates it if necessary
|
CE |
getCorrespondingSIUnitsOfMeasure()
Returns
OM2-4: "Corresponding SI Units of Measure" - creates it if necessary
|
CM_RANGE |
getCriticalRangeForOrdinalContinuousObs()
Returns
OM2-7: "Critical Range for Ordinal & Continuous Obs" - creates it if necessary
|
CM_DLT[] |
getDeltaCheckCriteria()
Returns all repetitions of Delta Check Criteria (OM2-9).
|
CM_DLT |
getDeltaCheckCriteria(int rep)
Returns a specific repetition of
OM2-9: "Delta Check Criteria" - creates it if necessary
|
int |
getDeltaCheckCriteriaReps()
Returns a count of the current number of repetitions of Delta Check Criteria (OM2-9).
|
NM |
getMinimumMeaningfulIncrements()
Returns
OM2-10: "Minimum Meaningful Increments" - creates it if necessary
|
NM |
getOm21_SequenceNumberTestObservationMasterFile()
Returns
OM2-1: "Sequence Number - Test/ Observation Master File" - creates it if necessary
|
NM |
getOm210_MinimumMeaningfulIncrements()
Returns
OM2-10: "Minimum Meaningful Increments" - creates it if necessary
|
CE |
getOm22_UnitsOfMeasure()
Returns
OM2-2: "Units of Measure" - creates it if necessary
|
NM[] |
getOm23_RangeOfDecimalPrecision()
Returns all repetitions of Range of Decimal Precision (OM2-3).
|
NM |
getOm23_RangeOfDecimalPrecision(int rep)
Returns a specific repetition of
OM2-3: "Range of Decimal Precision" - creates it if necessary
|
int |
getOm23_RangeOfDecimalPrecisionReps()
Returns a count of the current number of repetitions of Range of Decimal Precision (OM2-3).
|
CE |
getOm24_CorrespondingSIUnitsOfMeasure()
Returns
OM2-4: "Corresponding SI Units of Measure" - creates it if necessary
|
TX |
getOm25_SIConversionFactor()
Returns
OM2-5: "SI Conversion Factor" - creates it if necessary
|
CM_RFR |
getOm26_ReferenceNormalRangeOrdinalContinuousObs()
Returns
OM2-6: "Reference (Normal) Range - Ordinal & Continuous Obs" - creates it if necessary
|
CM_RANGE |
getOm27_CriticalRangeForOrdinalContinuousObs()
Returns
OM2-7: "Critical Range for Ordinal & Continuous Obs" - creates it if necessary
|
CM_ABS_RANGE |
getOm28_AbsoluteRangeForOrdinalContinuousObs()
Returns
OM2-8: "Absolute Range for Ordinal & Continuous Obs" - creates it if necessary
|
CM_DLT[] |
getOm29_DeltaCheckCriteria()
Returns all repetitions of Delta Check Criteria (OM2-9).
|
CM_DLT |
getOm29_DeltaCheckCriteria(int rep)
Returns a specific repetition of
OM2-9: "Delta Check Criteria" - creates it if necessary
|
int |
getOm29_DeltaCheckCriteriaReps()
Returns a count of the current number of repetitions of Delta Check Criteria (OM2-9).
|
NM[] |
getRangeOfDecimalPrecision()
Returns all repetitions of Range of Decimal Precision (OM2-3).
|
NM |
getRangeOfDecimalPrecision(int rep)
Returns a specific repetition of
OM2-3: "Range of Decimal Precision" - creates it if necessary
|
int |
getRangeOfDecimalPrecisionReps()
Returns a count of the current number of repetitions of Range of Decimal Precision (OM2-3).
|
CM_RFR |
getReferenceNormalRangeOrdinalContinuousObs()
Returns
OM2-6: "Reference (Normal) Range - Ordinal & Continuous Obs" - creates it if necessary
|
NM |
getSequenceNumberTestObservationMasterFile()
Returns
OM2-1: "Sequence Number - Test/ Observation Master File" - creates it if necessary
|
TX |
getSIConversionFactor()
Returns
OM2-5: "SI Conversion Factor" - creates it if necessary
|
CE |
getUnitsOfMeasure()
Returns
OM2-2: "Units of Measure" - creates it if necessary
|
CM_DLT |
insertDeltaCheckCriteria(int rep)
Inserts a repetition of
OM2-9: "Delta Check Criteria" at a specific index
|
NM |
insertOm23_RangeOfDecimalPrecision(int rep)
Inserts a repetition of
OM2-3: "Range of Decimal Precision" at a specific index
|
CM_DLT |
insertOm29_DeltaCheckCriteria(int rep)
Inserts a repetition of
OM2-9: "Delta Check Criteria" at a specific index
|
NM |
insertRangeOfDecimalPrecision(int rep)
Inserts a repetition of
OM2-3: "Range of Decimal Precision" at a specific index
|
CM_DLT |
removeDeltaCheckCriteria(int rep)
Removes a repetition of
OM2-9: "Delta Check Criteria" at a specific index
|
NM |
removeOm23_RangeOfDecimalPrecision(int rep)
Removes a repetition of
OM2-3: "Range of Decimal Precision" at a specific index
|
CM_DLT |
removeOm29_DeltaCheckCriteria(int rep)
Removes a repetition of
OM2-9: "Delta Check Criteria" at a specific index
|
NM |
removeRangeOfDecimalPrecision(int rep)
Removes a repetition of
OM2-3: "Range of Decimal Precision" at a specific index
|
accept, add, add, clear, encode, getField, getField, getLength, getMaxCardinality, getName, getNames, getReps, getTypedField, getTypedField, insertRepetition, isEmpty, isRequired, main, numFields, parse, provideLocation, removeRepetition
getMessage, getParent
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait
getMessage, getParent
public OM2(Group parent, ModelClassFactory factory)
public NM getSequenceNumberTestObservationMasterFile()
public NM getOm21_SequenceNumberTestObservationMasterFile()
public CE getUnitsOfMeasure()
public CE getOm22_UnitsOfMeasure()
public NM[] getRangeOfDecimalPrecision()
public NM[] getOm23_RangeOfDecimalPrecision()
public int getRangeOfDecimalPrecisionReps()
public NM getRangeOfDecimalPrecision(int rep)
rep
- The repetition index (0-indexed)public NM getOm23_RangeOfDecimalPrecision(int rep)
rep
- The repetition index (0-indexed)public int getOm23_RangeOfDecimalPrecisionReps()
public NM insertRangeOfDecimalPrecision(int rep) throws HL7Exception
rep
- The repetition index (0-indexed)HL7Exception
- If the rep is invalid (below 0, or too high for the allowable repetitions)public NM insertOm23_RangeOfDecimalPrecision(int rep) throws HL7Exception
rep
- The repetition index (0-indexed)HL7Exception
- If the rep is invalid (below 0, or too high for the allowable repetitions)public NM removeRangeOfDecimalPrecision(int rep) throws HL7Exception
rep
- The repetition index (0-indexed)HL7Exception
- If the rep is invalid (below 0, or too high for the allowable repetitions)public NM removeOm23_RangeOfDecimalPrecision(int rep) throws HL7Exception
rep
- The repetition index (0-indexed)HL7Exception
- If the rep is invalid (below 0, or too high for the allowable repetitions)public CE getCorrespondingSIUnitsOfMeasure()
public CE getOm24_CorrespondingSIUnitsOfMeasure()
public TX getSIConversionFactor()
public TX getOm25_SIConversionFactor()
public CM_RFR getReferenceNormalRangeOrdinalContinuousObs()
public CM_RFR getOm26_ReferenceNormalRangeOrdinalContinuousObs()
public CM_RANGE getCriticalRangeForOrdinalContinuousObs()
public CM_RANGE getOm27_CriticalRangeForOrdinalContinuousObs()
public CM_ABS_RANGE getAbsoluteRangeForOrdinalContinuousObs()
public CM_ABS_RANGE getOm28_AbsoluteRangeForOrdinalContinuousObs()
public CM_DLT[] getDeltaCheckCriteria()
public CM_DLT[] getOm29_DeltaCheckCriteria()
public int getDeltaCheckCriteriaReps()
public CM_DLT getDeltaCheckCriteria(int rep)
rep
- The repetition index (0-indexed)public CM_DLT getOm29_DeltaCheckCriteria(int rep)
rep
- The repetition index (0-indexed)public int getOm29_DeltaCheckCriteriaReps()
public CM_DLT insertDeltaCheckCriteria(int rep) throws HL7Exception
rep
- The repetition index (0-indexed)HL7Exception
- If the rep is invalid (below 0, or too high for the allowable repetitions)public CM_DLT insertOm29_DeltaCheckCriteria(int rep) throws HL7Exception
rep
- The repetition index (0-indexed)HL7Exception
- If the rep is invalid (below 0, or too high for the allowable repetitions)public CM_DLT removeDeltaCheckCriteria(int rep) throws HL7Exception
rep
- The repetition index (0-indexed)HL7Exception
- If the rep is invalid (below 0, or too high for the allowable repetitions)public CM_DLT removeOm29_DeltaCheckCriteria(int rep) throws HL7Exception
rep
- The repetition index (0-indexed)HL7Exception
- If the rep is invalid (below 0, or too high for the allowable repetitions)public NM getMinimumMeaningfulIncrements()
public NM getOm210_MinimumMeaningfulIncrements()
protected Type createNewTypeWithoutReflection(int field)
createNewTypeWithoutReflection
in class AbstractSegment
Copyright © 2001–2017 University Health Network. All rights reserved.